Skip to main content

NEC SV8100 / 8500 / 9500

These instructions help you configure your NEC SV8100/8500/9500 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Plus application:

NEC DXE.TDS
NEC DXE.TDT

Contents​

Configure the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

Follow the instructions below to configure your SV8100/8500/9500 for use with TIM Plus:

External equipment LAN setup​

nec_sv8100

SMDR options​

nec_sv8100

SMDR port assignment for trunk groups​

nec_sv8100

Trunk Basic setup​

nec_sv8100

CD DP00 Network setup​

nec_sv8100

Configure TIM Plus​

Follow the steps below to configure TIM Plus to connect to your NEC SV8100/8500/9500:

  1. Click on the Directory tab.
  2. If you don't have a site set up, press Add and select PBX from the drop-down menu. In the dialogue window, name your site and then select Add.
  3. Locate the site object you want to configure in the Directory, click on it and select Properties. nec_sv8100
  4. In the Site Properties window, select NEC DXE from the PBX model drop-down list.
  5. In the Connection method field, select Actively connect to PBX from the drop-down list.
  6. In the Host field, enter the IP address of your NEC SV8100.
  7. In the Port field, enter 60010.
  8. Leave the Username and Password fields blank.
  9. In the Connection script field, select Generic Simple from the drop-down list.
  10. Click on the Options tab and tick the Keep a local backup of any data tickbox, as shown below TIM Plus PBX backup options
  11. Click on the Save button to apply the settings.