Skip to main content

NEC NEAX - IP connection

These instructions help you configure your NEC NEAX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Plus application:

NEC NEAX.TDT
NEC NEAX.TDS

Connection Type​

TIM Plus establishes a TCP connection to this PBX.

Contents​

Configuring the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

By default, the SMDR output of your NEC NEAX is not enabled. For more information about enabling and configuring the SMDR output, contact your system maintainer.

Configuring TIM Plus​

Follow the steps below to configure TIM Plus to connect to your NEC NEAX:

  1. Click on the Directory tab.
  2. If you don't have a site set up, press Add and select PBX from the drop-down menu. In the dialogue window, name your site and then select Add. nec_neax.png
  3. In the Site Properties window, select NEC NEAX from the PBX model drop-down list.
  4. In the Connection method field, select Actively connect to PBX from the drop-down list.
  5. In the Host field, enter the IP address of your NEC NEAX.
  6. In the Port field, enter 2599.
  7. Leave the Username and Password fields blank.
  8. In the Connection script field, select Generic Simple from the drop-down list.
  9. Click on the Options tab and tick the Keep a local backup of any data tickbox, as shown below.
  10. TIM Plus PBX backup options
  11. Click on the Save button to apply the settings.